ElecGear Add-on Tactile Switch Compatible with Xbox & Other Controllers – 10 Packs Universal FPCB Module with Micro Tact Switch for ABXY and D-pad Conductive Rubber Buttons

The FPCB is an add-on daughter board stacking onto the main board. It works with Xbox ABXY, View, Menu and Share buttons. It also replaces the stock conductive rubber buttons in many other third-party controllers, covering D-Pad, ABXY and other buttons. The premium 100g-actuation tact switches feature a short 0.3mm travel, ultra-responsive feedback, and a crisp, mouse-like click sound [3 Connection Options] 1. Attach to the controller motherboard using the dedicated conductive foam for Xbox controllers. 2. Solder the FPCB directly to the original printed contact pads. 3. Affix the FPCB to the motherboard and wire it with individual leads. (🔺Note: Please study the image to confirm compatibility with your specific controller. Soldering skills and supplies are required for Options 2 and 3.) [Compatibility Notes] 3 key checks are required before ordering. 1. Verify there is sufficient internal space to fit the tactile switch (check dimensions in the diagram). 2. Confirm the connection method – soldering is mandatory for most third-party controllers. 3. Ensure proper cushioning contact between the button and the tact switch. (🔺Note: 3D printing, trimming and other modifications are often needed. But not fully included.) What’s in the box: 10x Micro Tactile Switch Conductive Foam Insulation Pads D6 Insulation Pads D10 34AWG Wires Supportive Pads Cushioning Rubbers for Xbox 0.2mm Silicone Pad 0.4mm Silicone Pad

• [Universal Tactile Switch] – The FPCB is an add-on daughter board stacking onto the main board. It works with Xbox ABXY, View, Menu and Share buttons. It also replaces the stock conductive rubber buttons in many other controllers, covering D-Pad, ABXY and other function buttons. The premium 100g-actuation tact switches feature a short 0.3mm travel, ultra-responsive feedback, and a crisp, mouse-like click sound
• [3 Connection Options]‌ – 1. Attach to the controller motherboard using the dedicated conductive foam for Xbox controllers. 2. Solder the FPCB directly to the original printed contact pads. 3. Affix the FPCB to the motherboard and wire it with individual leads. (🔺Note: Please refer to the images to confirm compatibility with your specific controller. Soldering skills and supplies are required for Options 2 and 3.)
• [🔺Compatibility Notes] – Electronically, these switches work with all controller buttons. Three key checks are required before ordering. 1. Verify there is sufficient internal space to fit the tactile switch (check dimensions in the diagram). 2. Confirm the connection method – soldering is mandatory for most third-party controllers. 3. Ensure proper cushioning contact between the button and the tact switch. 3D printing, trimming and other modifications are often needed. But not included
• [Cushioning Accessories for Xbox]‌ – The kit includes 3D-printed inserts and adhesive pads to work with Xbox 1537, 1697, 1698 Elite, 1708, 1797 Elite 2 and 1914 Series Core models. For other third-party controllers, 0.2mm and 0.4mm thick adhesive pads are included for custom trimming. Additional modifications may be needed to achieve perfect actuation. Watch the full demo on YouTube ‘ElecGear Add-on Tactile Switch compatible with Xbox & Other Controllers’.